HARDWARE
● AVAILABLE NOW  ·  Limited stock  ·  Ships worldwide

Portable
Deauther

// PDA · Physical Hardware

A portable, battery-powered WiFi deauthentication device with full ESP8266 capabilities. Control it over WiFi or the companion mobile app, save target SSIDs and credentials, and upgrade firmware over the air. Available with or without an OLED display for on-device status.

Order Now → See Variants Firmware ↗
Status● Available
Form factorPortable · encased
ChipESP8266 · full GPIO
PowerInternal LiPo battery
ControlWiFi · Mobile app
Attack mode802.11 deauth frames
DisplaySSD1306 OLED (PDA-D only)
VariantsDisplay · Stealth
Firmwaregithub ↗
Price€119 + shipping
Stock⚠ Limited
The Portable Deauther is a NoHatHacker product by Adamantware OU. Open source firmware, assembled and tested in Portugal. Built for authorised WiFi security assessments, physical pentests, and wireless lab work.
Hardware
Choose Your Edition
[ PRODUCT PHOTO ]
PORTABLE DEAUTHER
DISPLAY EDITION

OLED status display
Live attack feedback on-device
Portable Deauther — Display Edition
PDA-D · With OLED display
Features a small OLED screen showing live attack status, target count, IP address, and battery level directly on the device — no phone or laptop required to confirm it's running.
€119
+ shipping & delivery tax
Tax varies by destination and current tariff situation.
⚠ Limited stock — production runs are small batches
Order Now →
[ PRODUCT PHOTO ]
PORTABLE DEAUTHER
STEALTH EDITION

No display
Smaller profile · harder to spot
Portable Deauther — Stealth Edition
PDA-S · No screen
Display-free design for the smallest enclosure profile. All status information is available via the WiFi control panel or companion mobile app. Harder to identify if found.
€119
+ shipping & delivery tax
Tax varies by destination and current tariff situation.
⚠ Limited stock — production runs are small batches
Order Now →
Capabilities
What It Does
📡
Continuous Deauth Attack
Floods the target network with 802.11 deauthentication frames — disconnecting every client and preventing reconnection until you stop it or the battery dies.
🔋
Battery Powered
Internal LiPo battery means no power cable needed. Carry it in a bag, leave it on a shelf — no trace, no wire. USB-C charging.
📶
WiFi Remote Control
Connect to the device's own management AP or join it to an existing network. Start, stop and configure attacks from any browser on the same network.
📱
Mobile App Control
Companion app (iOS + Android) lets you manage the device, view attack status, battery level and target count without a laptop.
💾
Save SSID + Password
Store WiFi credentials on the device via the web UI. At next boot the device connects automatically to your saved network — no reconfiguration needed on deployment.
🎯
Target Selection
Scan nearby SSIDs and select specific networks or clients. Broadcast deauth hits everyone; targeted mode picks specific MAC addresses or SSIDs.
🖥️
OLED Status Display (PDA-D)
Real-time display of attack mode, targets hit, IP address, and battery level. Confirm the device is running without opening a browser or launching the app.
⚙️
Open Source Firmware
Firmware is open source and available on GitHub. Built on the full ESP8266 chipset — modify, extend, or inspect it yourself.
Setup
Save SSID & Password
📶 Connect to an Existing Network
  1. Power on the device. It will create its own management access point (NoHatHacker-PDA by default).
  2. Connect to that AP from your phone or laptop. Open a browser and navigate to http://192.168.4.1
  3. Go to Settings → WiFi in the web interface.
  4. Enter the SSID and password of the network you want the device to join on the next boot.
  5. Save and reboot. The device will connect to your saved network and acquire a DHCP address. That address appears on the OLED display (PDA-D) or in your router's client list (PDA-S).
  6. Access the web UI at the assigned IP. From now on the device auto-joins on every power cycle.
⚠ Saved credentials are stored in the device's flash (LittleFS). They persist across reboots and firmware upgrades as long as the filesystem partition is not erased.
Firmware
Upgrade & Source
8266Deauther Firmware
→ View on GitHub
OTA Upgrade
Upload a new .bin via the web UI at Settings → Firmware Update. No USB cable or flashing tool needed.
Serial Flash
Use esptool.py or Arduino IDE with the source from GitHub to flash over USB if OTA is unavailable.
Build Flavors
PDA-D: uncomment #define USE_DISPLAY in esp8266_deauther.ino — enables SSD1306 on I²C (0x3c, SDA=D1, SCL=D2).

PDA-S: leave the line commented. No display library linked, smaller binary.
Build Requirements
Arduino IDE + esp8266 board package (pin to 2.7.4 for deauth frame support). Dependencies listed in the repository README.
⚠ Memory note: The ESP8266 has ~1 MB of available flash after firmware. OTA uploads replace the running image — the web UI is available during the upgrade but graphs and heavy UI components may be simplified to keep within flash budget. Settings and saved credentials are preserved across upgrades.
Comparison
Portable Deauther vs. The Field
Feature Portable Deauther WiFi Pineapple Mark VII Tiny Deauther (TDA) Flipper Zero + WiFi dev
Battery powered✓✗ Requires USB power✓✓
Optional OLED display✓ PDA-D edition✗✗ No display✓ Flipper screen
Save SSID + password✓ Persistent flash✓Limited flash✗
WiFi remote control✓ Built-in✓✓✗
Mobile app✓ iOS + Android✓✓✓ Flipper app
OTA firmware upgrade✓ Web UI upload✓✗ Serial only✓
Open source firmware✓ GitHub✗ Proprietary✓ GitHub✓
Ready out of box✓✓✓Partial setup
Price€119 + shipping~€200+€99 + shipping~€170+

✓ = yes · ✗ = no · partial = limited or requires extra setup. Competitor pricing approximate, 2026.

Use Cases
When You Need This
🏢
Physical Pentest — Wireless DoS
Place it during a physical access assessment to test whether staff notice WiFi outages, investigate the cause, or blindly call IT.
🔓
Social Engineering Support
Knock the corporate WiFi offline while your team walks through the door during the "IT outage" — classic pretexting setup.
🧪
Wireless Security Lab Testing
Test detection capabilities in your own lab. Does your WIDS fire? Does NOC notice? What's the mean time to investigation?
Order Your Portable Deauther
⚠ Limited stock — production runs are small batches. Orders ship in the sequence received.
€119 + shipping & tax
Shipping cost and applicable delivery taxes are calculated at order confirmation.
Tariffs may apply depending on destination country and current import regulations.
Allow 1–3 weeks for dispatch from Portugal.

Order requests are reviewed within 24h. You will receive a PayPal invoice to your email with the exact total including shipping and applicable taxes. Stock is reserved on invoice payment.